Sewing and Embroidery Machine Janome Memory Craft 1000

Computerized Sewing and Embroidery Machine Janome Memory Craft 1000

Magnetic needle plate – to switch the needle plate from zigzag to straight stitch, insert the included screwdriver into the hole at the front of the needle plate and lift slightly. The magnetic holder will release, allowing you to replace the plate without removing any screws!

Thoughtful features – the MC1000’s built‑in free arm conveniently stores all included accessories. You can cut the upper and bobbin thread with a single button press, and during embroidery the machine automatically trims jump stitches.

300 built‑in stitches with on‑screen settings – when you select any of the 300 built‑in stitches, the Memory Craft 1000 automatically loads the recommended settings for that stitch and advises which presser foot is best to use.

On‑screen embroidery editing – on the 3.5-inch touchscreen you can easily resize designs, rotate them, flip them, or change thread colors. You can create more complex designs by copying, combining patterns and letters, creating monograms, and more. You’ll be surprised how many editing functions can be done directly on the embroidery machine.

Easy fabric hooping – with the new Easy Hoop Tightening System! Center the fabric and insert the inner hoop with the lever fully released. Tighten the lever halfway to secure the hoop enough for final fabric tension adjustments, then turn the lever fully to tighten the hoop completely.

Easy-access support – scan the code on your embroidery machine’s screen and you’ll be directed to an online library of support materials.

Free‑arm embroidery – some items were once considered “impossible” to embroider on most home embroidery machines: baby rompers, jacket cuffs, pant legs, or tube‑shaped projects. Additional free‑arm embroidery hoops change the rules. By allowing the garment to move around the free arm, you can easily embroider the most difficult areas or already‑finished items. Available hoops: FA10e (100 × 40 mm) or FA5e (50 × 50 mm).

Optical bobbin thread monitoring – there’s no worse feeling during embroidery than running out of bobbin thread. The optical bobbin sensor uses light to monitor the thread on the bobbin and stops sewing or embroidering when it runs out. It warns you when the thread is low so you can replace the bobbin before it’s empty.

Integrated “In‑The‑Hoop” designs – did you know your embroidery machine can create sewing projects almost entirely inside the hoop? With the built‑in In‑The‑Hoop designs, you can create heartfelt gifts in just minutes!