RUBINA RB-9400CP straight-stitch industrial machine with automation and puller

RUBINA RB-9400CP straight-stitch industrial machine with automation and puller (comes with a table Made in Germany)

Rubina RB-9400CP is a straight-stitch shuttle machine with automation and an additional material transport puller. Ideally suited for sewing curtains and other home textiles. The machine has a built-in DC motor directly connected to the main shaft (no belt).

Due to its quiet operation, it is suitable for home use.

The machine has the following automatic functions:

• Extremely quiet thread trimming, controlled by a stepper motor. This system produces a very short thread end – up to 3 mm.
• Extremely quiet stitch locking at the beginning and end of the seam, which can also be programmed to perform single, double, quadruple stitches. The performance is controlled by a stepper motor.
• Needle positioning – the needle will always stop at the bottom or top.
• Extremely quiet presser foot lifting, controlled by a stepper motor.
• Programmable decorative stitches.
• 4 easily accessible buttons that allow easy stitch locking and shorter individual stitches.
• Electronic stitch length control.
• The machine uses a closed lubrication system, there is no open oil reservoir. This helps better protect your product from oil drops.

Technical characteristics:

• 9 programmable decorative stitches
• Automatic thread trimming using a stepper motor
• Automatic presser foot lifting using a stepper motor
• Automatic stitch locking using a stepper motor
• Built-in DC motor 550W
• Stitch length up to 6 mm
• LED needle lighting
• Automatic needle positioning
• Closed lubrication system
• Maximum sewing speed 5000 stitches/min.
• Minimum sewing speed 100 stitches/min.
• Table dimensions 105 x 50 cm

Control panel description:

• Stitch length setting
• Single stitch locking with adjustable density (from 1 to 9 dense stitches)
• Weak locking in place (without reverse)
• Activation of decorative stitch function
• Decorative stitch selection
• Speed increase
• Speed decrease
• Parameter increase/decrease
• Functional parameter change (for mechanics only)
• Confirmation button (for mechanics only)
• Stitch locking at the beginning of the seam (by pressing the button several times, you can choose single or double locking)
• Stitch locking at the end of the seam (by pressing the button several times, you can choose single or double locking)
• Needle position change in the middle of the seam
• Automatic presser foot lifting (each time it stops)
• Simple sewing
• Only stitch locking (with the S button you can choose how many times the machine will move forward/backward performing one locking)
• Slow start function
• Pedal presser foot lifting function activation/deactivation
• Template sewing (labels), the number of template stitches is set with the +- buttons and the S button.
• Maintaining constant speed during template sewing
• Thread trimming function
• Needle position (always stops at the top or bottom)

For price inquiries, you can call +37069988349, email eduardas@siuvimostilius.lt, or fill out the inquiry form by clicking the “Inquire” button.